Today, we will talk about the removal method of PVC board ceiling. PVC ceiling is also called PVC ceiling. Let's have a look at the specific content.
1. when removing the PVC board ceiling, remove the battens at one end, take out the boards one by one from the battens, replace the damaged boards with new boards, and reinstall the pressed battens. The color difference shall be minimized during replacement. Precautions for PVC ceiling removal (it is recommended to ask special personnel to remove it to avoid damaging and replacing the PVC ceiling)
2. During the removal of PVC board ceiling, the stability of equipment and facilities in the original ceiling shall be considered to avoid damage to pipes and equipment during removal; When removing the original ceiling in the kitchen and toilet, avoid damaging the ventilation duct and flue; The original pipeline in the ceiling shall be removed as far as possible, and no further use shall be considered.
3. the stability of the ceiling shall be given priority in the decoration design of the second-hand house. In particular, some old houses that have been used for more than 15 years have begun to age. In addition, due to the requirements of the suspension structure during the construction of the original ceiling, many holes were drilled on the top surface, reducing the local bearing capacity.
4. the removal and reconstruction of PVC board ceiling in kitchen and toilet shall pay attention to the impact on indoor light source. The ceiling height shall be moderate, which will have an impact on wall decoration and soft decoration in the future.
5. pay attention to the echo relationship between PVC ceiling and floor. When the floor function and ceiling are asymmetric, it will affect the placement of furniture and other furnishings in the future.
The main advantages of PVC board are light weight, easy installation, waterproof, moisture-proof, moth proof, large changes in surface color and pattern, pollution resistance, easy cleaning, and good sound and heat insulation performance. In particular, flame retardant materials are added to the new process, so that it can extinguish the fire when it leaves the fire, and the use is more stable.